Interested in ECAD/MCAD collaboration?
To see a live demonstration of how Xpedition VX1.1 and PTC's Creo Parametric work together to automate the ECAD/MCAD design data exchange and collaboration process, tune in to PTC's webinar on June 25....
View ArticleCopy Values from CES Class To Class Rules in VX
Hi all, in the Past (7.9.4) it was possible to copy all Values included NetClassNames from CES Class-To-Class Clearances with CTRL-C. But in VX 1.1 it seems to not work anymore ?I need this to check in...
View ArticleIntegrator-to-XC Sync Issue
Good morning, I’m running into an issue when I sync wire information froman Integrator plane to a harness in XC where some wires “lose” one connectionpoint. So then, after running design rule checks I...
View ArticleIssues with partial vias in Router 9.5
I'm experiencing strange behavior with partial vias in my design. I select an object, press F3 to route a trace then hit CTRL-Left click to place a via. Partial via is selected. Router will place a...
View ArticleUpdating xDx Databook
Hi all,How can I update xDx databook with latest component information? Is there a some sort of script so that I can run to extract component data from suppliers like Digikey,Mouser ..etc. ? thank you
View ArticleXpedition Enterprise schematic in read only mode
My schematic stays in read only mode, asking for a forward annotation in layout tool. But when i do so it stays in read only mode. I have tried several things now but it doesn't allow me to edit the...
View ArticleDisplay customer part number Capital Harness XC
How to change the style set to display the customer part number instead of the internal part number in Capital Harness XC?
View ArticleModelsim running error - Fedora 20
Hi guys, i just installed fedora 20 and Quartus II 13.1 with Model Sim Starter Edition.I downloaded all required packages, but when i try to run modelsim, it shows me this msg: [root@localhost...
View ArticleScript under EE7.9.5
Hi, It seems the Block.AddText command didn't work under the EE7.9.5 release! for each Line in LineList.ToArray() Block.AddText Line,X,Y Y=Y-DeltaY Next I looked the documentation but nothing...
View ArticleHow to list aggressors in batch crosstalk sim?
I see the aggressor listed in the quick analysis report file, but not in the detailed analysis spreadsheet. How can I do a detailed analysis and get the agressors listed, so that I can track them down...
View ArticleClik here to view.
Sub-component problem
Hi! I've made a sub-component for a connector. The component (which I use as a sub-component in this case) has a symbol attached to it (and the symbol has the same name as the component of course)....
View ArticleNC Symbol
Using Expedition Flow, both 7.9.1 and VX version. (problem is the same in both) We have created an NC schematic symbol as per Technote MG527127. Now when the this is used on schematic designs...
View ArticleAdding wire bonds to bottom side die pins
Hi, are there any special pitfalls when using bottom (back) side die pins? I have no problems to add wires from die top side to bondpads on the top side (WB1 in attached picture). But when I try to add...
View ArticleHow to measure multiple trace lengths?
Hey I used to be able to measure the length of all selected trace segments and choose properties and it would list the total length of the selected segments. Now, if you select more than one trace...
View ArticleCan I add multiple netname labels on the same page?
I would like to add the same netname label in several locations along the wire drawn in the schematic. Is this possible? I do not want to use dummy text.
View ArticleDrill to drill error in stacked blind and buried via in Pads layout 9.5 ???
Hi everyone, I am working on 8-Layre stack-up board in PADS layout. I have blind VIA (L1-L2) and Buried Via (L2-L3). when I stacked blind and buried VIA, am getting Drill to Drill error.can anyone...
View ArticleDesigner Schematic/Layout Questions
Designer Schematic/Layout is so new. I can't find a thing about this suite. I only found the tutorials on eewiki.net from Digikey. Could someone guide me to more info? Is there are forum dedicated to...
View ArticleIE3D port reference definition problem
I just tried the HypLynx v9.2 IE3D capability. To start with, I just exported a very simple small 3D area from a board with a embedded differential strip lines with the top plane as GND and bottom...
View ArticleClik here to view.
AATK 4.1 released
AATK_V4.1 is on SourceForge. If you have a problem that you can't fix on your own, give me an email and I will see what I can do. I didn't get everything but close! You can Download it from here:...
View ArticleWhat exactly does the demonstration mode in PADS Layout limit? (PADS 9.5)
Hi, Sometimes I'm unlucky and none of the floating licenses are available while I need to open PADS Layout. The software tells me that it will start in demonstration mode instead. What exactly does...
View Article