fast eye analysis
hai what is the difference between fast eye analysis and eye diagram analysisregardsagxin.j
View ArticleAltium Designer to Mentor graphics expedition VX.1 PCB design
Hello, I tried following recommendation how to translate pcb design created by using Altium Designer into Expedition VX.1:How to translate a Altium Designer Project to Expedition PCB? Now, I have...
View ArticleClik here to view.
Backdrill to a given distance instead of given layer
Hello folks, In a backplane backdrill is used to drill back from the bottom to as much as possible.In this case we have a 10 layer backplane. The useful signal exits at layer 2, and it would be natural...
View ArticleChecklist updation of ERF in Valor
Hello, Why did the checklist ERF not updated eventhough the changes being done in ERF model ,When running the file with ERF without checklist it works fine ,but the same ERF model in the check...
View ArticlePlease link your Digi-Key account to search for parts.
Gary, To use PartQuest now you must link to a Digi-Key account. I have tried two different browsers and can't get this accomplished. John W.
View ArticleARM CodeBench license issue: "no such feature exists"
I bought a license for our new build server (VM running Win7 Ultimate on VMWare Workstation 10.0.4) and installed it via theSourcery CodeBench IDE (Version: 2014.05-36). The IDE accepted the license...
View ArticleHow do i make hetro symbols for a TLC2272 that refdes correctly
Hi All,I created two symbols for the TLC2272 separating the power and ground as a separate symbol but when I refdes the two symbols the power symbol gets a different refdes number. My guess is I have...
View ArticleClik here to view.
DC2DX Library & Schematic Translator Issues
HI, I am trying to translate our library from DC to DX in 7.9.5 and I am having an issue with some of the parts not translating correctly. I am also try to translate a schematic over to see what issues...
View ArticlePorting Nucleus RTOS to BeagleBone
Hi All, I have started porting nucleus RTOS to BeagleBone TI board.But i am not confirm BeagleBoard support Nucleus RTOS Please can any one clarify this one???????? If it is possible give please me...
View ArticleUnwanted lines found in Inner Layers for Translated Components
Hello , Unwanted lines are found in inner layers for the components translated from CADSTAR to PADS . No lines are found in inner layers for the components in CAD @library . What could be the reason...
View ArticleClik here to view.
how to change the Diff Pair trace widht ??
Hi ,i set the differential pair for my design.i could not change the trace widht for assigned pair.in default i keep min trace width is 4mil and max is 25mil.if i assigned differential it is...
View ArticleClik here to view.
Sub-component problem
Hi! I've made a sub-component for a connector. The component (which I use as a sub-component in this case) has a symbol attached to it (and the symbol has the same name as the component of course)....
View ArticleClik here to view.
issue in Library part creation in pads logic ??
Hi everyone,i created CAP part type which contain CAP_0402 and Alternative part is CAP_0603.For CAP_0402 symbol i assigned 0402_1 and For CAP_0603 symbol i assigned 0603 decal.while importing netlist...
View ArticleHow to Teardrop traces
Using Expedition 7.9.1 Have a large track which need to neck down/teardrop into a pad - how do I do this? From what I see the standard settings in expedition teardrop pad-to-trace this is not what I...
View Articlehow to create custom off page symbol in pads logic ??
i need to create custom off page connector symbol in pads logic and let me know what is mean by logic icon while creating library ??
View Articleidentify every instance in netlist from Layout
Hi All I am having netlist of one gds and I want to identify every instance in layout and netlist. As in netlist everything is in random manner and all nets also don't have names to identify. Any idea...
View ArticleHow to assign all unassigned pins to signals in IO Designer?
Hi all, In IO Designer after importing the UCF file, only one pin is assigned to signal from power and ground group.Remaining pins are in unassigned pins list. What is the easy method to assign all...
View ArticleHow to use paste from layout clipboard in VX.1
Hi All, I am using Xpedition VX.1 version. I have grouped the parts in my layout and I waana use same parts in another layout ( same kind of parts) as like "paste from layout clipboard" option in...
View ArticleClik here to view.
Pads Layout Viewer can not set max layers
I just installed Pads Layout Viewer, it seems many functions at Layer Definition tab were disabled. I have some asc board layout file shows following error. what can i do?
View ArticleMulti person working on single board is possible in PADS ??
Hi everyone,Right now i am working on complexity board.i need to support another person to support placement and Routing ?? i heard about reuse method so it will help for this project.can any body...
View Article