Hi.
I have a schematic with a ground symbol ('device') connected to a 'splice' and wiring from the splice. This looks great on the schematic but gives a problem with Harness:
Problem is I have set up the Ring Terminal dummy connector with ring terminals added to it. Yet I now can not add this Ring Terminal 'connector' to the 'device' or 'splice' in Schematic.
I have raised it as an issue in 'Ideas' but need to know if anyone has a 'work around'. (Remembering of course that I can not add it directly to the harness, as per Classic, because the 'Synchronize' process will remove it.)
Any help would be appreciated.